Circuit symbols

விளையாடிக் கற்றுக்கொள்ளுங்கள்

ஆற்றல் சம்பாதிக்க இந்த கேள்விகளுக்குப் பதிலளியுங்கள், பின்னர் மீன் பிடித்து ஆராயுங்கள். கணக்கு தேவையில்லை.

ஆசிரியர்களுக்கு: Circuit symbols (KS3 Science, Physics)-க்கான தயாரான பாட ஸ்லைடுகள், திருப்புதல் குறிப்புகள், வரைபடங்கள் — உங்கள் பாடத்தில் அவற்றைப் பயன்படுத்தவும், அல்லது மாணவர்கள் நேரலை விளையாட்டாக விளையாடும் ஊடாடும் வகுப்பு செயல்பாடாக தலைப்பை இயக்கவும்.

பாட குறிப்புகள்

Circuit Diagrams

Circuit diagrams use symbols to represent electrical components.
Draw connecting wires with a ruler in pencil.
Wires are drawn as straight lines.
A series circuit has only one path for current.
A parallel circuit has more than one path for current.

Component Symbols

Connecting wire: a straight line joining components.
Cell: provides potential difference (voltage).
Battery: made of more than one cell.
Lamp: produces light.
Resistor: limits current and varies potential difference.
Open switch: circuit incomplete; current cannot flow.
Closed switch: circuit complete; current can flow.

Measuring Instruments

Ammeter: measures current; connected in series.
Voltmeter: measures potential difference; connected in parallel across a component.

Series vs Parallel

In a series circuit, components are connected end-to-end in a single loop.
In a parallel circuit, components are connected across separate branches.
Current is the same at all points in a series circuit.
In a parallel circuit, current splits between branches.

Key Facts

Current cannot flow through an incomplete circuit (open switch).
A cell is a single unit; a battery is two or more cells.
Ammeters must be placed in series with the component.
Voltmeters must be placed in parallel across the component.

A series circuit with a cell, switch, lamp and ammeter.

A series circuit with a battery and three lamps.

ஸ்லைடுகள்

Step through every slide for this topic — plus flashcards and revision notes — with a free account.

பதிவு செய்க — இலவசம்உள்நுழைக

பயிற்சி கேள்விகள்

இலவச முன்னோட்டம் — 55-இல் 8 கேள்விகள். அனைத்தையும் பார்க்க பதிவு செய்யவும்.

1.What is the purpose of an ammeter?
Easy
- ATo measure the current in a circuit
- BTo measure the potential difference across a component
- CTo limit the current in a circuit
- DTo provide potential difference to the circuit
2.Which of the following describes a series circuit?
Easy
- AA circuit with only one path for the current to flow
- BA circuit with more than one path for the current to flow
- CA circuit that contains a battery and a lamp
- DA circuit that contains an ammeter and a voltmeter
3.What is the difference between a cell and a battery?
Easy
- AA battery is made of more than one cell
- BA cell is made of more than one battery
- CA battery provides potential difference, a cell does not
- DThere is no difference
4.Which of the following statements is true?
Easy
- ACurrent cannot flow through an incomplete circuit
- BCurrent can flow through an incomplete circuit
- CAn open switch allows current to flow
- DA closed switch stops current from flowing
5.How is a voltmeter connected in a circuit?
Easy
- AIn parallel around the component you want to measure the potential difference across
- BIn series with the component you want to measure the potential difference across
- CIn parallel with the battery
- DIn series with the ammeter
6.What does the symbol of a closed switch represent?
Easy
- AA complete circuit that allows current to flow
- BAn incomplete circuit that blocks current
- CA component that measures current
- DA component that provides potential difference
7.Which component is used to limit the amount of current in a circuit?
Easy
- AA resistor
- BA lamp
- CA cell
- DA switch
8.What is the circuit symbol for a connecting wire?
Easy
- AA straight line
- BA zigzag line
- CA circle with a cross inside
- DTwo parallel lines of different lengths

மேலும் கேள்விகள்

9.In a circuit diagram, where should an ammeter be placed?
Easy
- AIn series in the part of the circuit where you want to measure the current
- BIn parallel around the component where you want to measure the current
- CIn series with the voltmeter
- DIn parallel with the battery
10.Which of the following is a correct description of a parallel circuit?
Easy
- AIt has more than one path for the current to flow
- BIt has only one path for the current to flow
- CIt cannot include a switch
- DIt must contain at least two cells
11.What is the correct way to draw a circuit diagram?
Easy
- AUse a pencil and a ruler for connecting wires
- BUse a pen and draw freehand wires
- CUse coloured pencils for each component
- DDraw wires as curved lines
12.Which of the following components provides potential difference to a circuit?
Easy
- AA cell
- BA lamp
- CA resistor
- DAn ammeter
13.In a series circuit containing a battery and two identical lamps, the current measured by an ammeter placed before the first lamp is 0.3 A. What is the current measured by an ammeter placed after the second lamp?
Medium
- A0.3 A
- B0.15 A
- C0.6 A
- D0 A
14.A student sets up a circuit with a cell, a lamp, and a voltmeter. The voltmeter reads 1.5 V. If the student replaces the cell with a battery of two identical cells, what will be the new voltmeter reading?
Medium
- A3.0 V
- B1.5 V
- C0.75 V
- D0 V
15.In the circuit diagram, a voltmeter is connected in parallel across a lamp. Which statement correctly explains why the voltmeter is connected this way?
Hard
- ATo measure the potential difference across the lamp, the voltmeter must be connected across it so that it measures the energy difference per unit charge between the two points.
- BTo measure the potential difference across the lamp, the voltmeter must be connected in series so that all current passes through it.
- CVoltmeters have very low resistance, so connecting them in parallel would short the lamp.
- DThe voltmeter should be connected in series because it measures current, not potential difference.
16.Which circuit symbol is used to represent a component that limits the amount of current in a circuit?
Easy
- AA resistor
- BA lamp
- CA switch
- DA cell
17.A circuit contains a battery, an open switch, and a lamp. What happens when the switch is closed?
Medium
- AThe lamp lights up because the circuit becomes complete and current flows.
- BThe lamp remains off because a switch cannot complete a circuit.
- CThe battery will be damaged because current flows through an open switch.
- DThe lamp lights up only if the switch is connected in parallel.
18.A student builds a series circuit with a 6 V battery, a lamp, and a resistor. The current in the circuit is 0.2 A. What is the potential difference across the resistor if the potential difference across the lamp is 2 V?
Medium
- A4 V
- B6 V
- C2 V
- D8 V
19.In a parallel circuit with a battery and three lamps, what happens if one lamp blows (breaks)?
Medium
- AThe other two lamps remain lit because each lamp has its own path for current.
- BAll lamps go out because the circuit is broken.
- CThe other two lamps become dimmer.
- DThe battery is shorted and stops working.
20.Which of the following is the correct circuit symbol for a cell?
Easy
- AA long line and a short thick line (representing the positive and negative terminals)
- BTwo parallel lines of different lengths (long and short)
- CA circle with a cross inside
- DA zigzag line
21.A student wants to measure the current flowing through a lamp. How should the ammeter be connected?
Easy
- AIn series with the lamp
- BIn parallel with the lamp
- CAcross the battery terminals
- DIn place of the lamp
22.In a circuit diagram, a battery is shown with three cells. Each cell provides 1.5 V. What is the total potential difference supplied by the battery?
Easy
- A4.5 V
- B1.5 V
- C3.0 V
- D0.5 V
23.What is the purpose of a switch in a circuit?
Easy
- ATo control whether current flows by completing or breaking the circuit
- BTo measure the current
- CTo provide a potential difference
- DTo limit the current
24.A circuit has a battery and two lamps connected in parallel. The current through the battery is 0.6 A. If one lamp has a current of 0.4 A, what is the current through the other lamp?
Medium
- A0.2 A
- B0.6 A
- C1.0 A
- D0.4 A
25.In a circuit diagram, a student draws a component with two long parallel lines (one longer and thinner, one shorter and thicker) and a short thick line between them. What is this component?
Easy
- AA cell
- BA battery
- CA resistor
- DA switch
26.Which of the following components is used to measure current in a circuit?
Easy
- AVoltmeter
- BAmmeter
- CResistor
- DSwitch
27.A student builds a circuit with a battery, a lamp, and a switch. The lamp does not light. Which of the following is a possible cause?
Easy
- AThe switch is closed.
- BThe switch is open.
- CThe battery is connected correctly.
- DThe lamp is not broken.
28.In a series circuit with a battery, an ammeter, a resistor, and a lamp, a voltmeter is connected in parallel across the lamp. The ammeter reads 0.5 A and the voltmeter reads 2 V. What is the potential difference across the resistor?
Hard
- AIt cannot be determined without the battery voltage.
- B2 V
- C0.5 V
- DEqual to the battery voltage minus 2 V
29.A circuit contains a battery and two identical lamps connected in parallel. The current through the battery is 0.6 A. What is the current through each lamp?
Medium
- A0.6 A
- B0.3 A
- C0.2 A
- D1.2 A
30.A student sets up a circuit with a battery, a switch, and a lamp. The switch is closed and the lamp lights. The student then adds a second identical lamp in series with the first. What happens to the brightness of the first lamp?
Medium
- AIt becomes brighter.
- BIt becomes dimmer.
- CIt stays the same.
- DIt goes out.
31.Which of the following is the correct way to connect a voltmeter to measure the potential difference across a lamp?
Easy
- AIn series with the lamp
- BIn parallel with the lamp
- CIn series with the battery
- DIn parallel with the battery
32.What is the circuit symbol for a resistor?
Easy
- AA zigzag line
- BA circle with a cross inside
- CA long rectangle
- DTwo parallel lines
33.In the circuit shown, component X is connected in series with a battery and a lamp. When the lamp is lit, component X has a potential difference of 0 V across it. What is component X?
Medium
- AA closed switch
- BAn open switch
- CA resistor
- DA second lamp
34.A student draws a circuit diagram with a battery, a switch, and a lamp. The connecting wires should be drawn as:
Easy
- ACurved lines
- BStraight lines using a ruler
- CDotted lines
- DAny lines, as long as they connect
35.In a parallel circuit with a battery and three lamps, each lamp has its own switch. If one lamp is switched off, what happens to the current through the other two lamps?
Medium
- AIt increases.
- BIt decreases.
- CIt stays the same.
- DIt becomes zero.
36.Which of the following statements about a series circuit is correct?
Medium
- AThe current is the same at all points.
- BThe voltage is the same across all components.
- CIf one component fails, the others still work.
- DThere is more than one path for current.
37.Which of the following is the correct circuit symbol for a resistor?
Easy
- AA zigzag line
- BA circle with a cross inside
- CTwo parallel lines of different lengths
- DA straight line
38.What does an open switch represent in a circuit?
Easy
- AThe circuit is incomplete and current cannot flow
- BThe circuit is complete and current can flow
- CThe switch is broken and must be replaced
- DThe switch allows current to flow in one direction only
39.In a series circuit with a battery, a lamp, and a resistor, which component provides potential difference?
Easy
- ABattery
- BLamp
- CResistor
- DConnecting wires
40.What is the purpose of a resistor in a circuit?
Easy
- ATo limit the amount of current in the circuit
- BTo provide potential difference
- CTo measure the current
- DTo switch the circuit on and off
41.Which circuit symbol is used to represent a component that provides potential difference?
Easy
- AA cell
- BA resistor
- CA lamp
- DAn ammeter
42.An ammeter must be connected in parallel with the component whose current you want to measure.
Medium
True or false?
43.In a circuit diagram, which component is represented by a circle with a cross inside?
Easy
- AA lamp
- BA cell
- CA resistor
- DAn ammeter
44.Match each circuit component to its correct function.
Medium
- Cell
- Resistor
- Switch
- Voltmeter
- Limits current
- Provides potential difference
- Measures potential difference
- Controls current flow
45.In a series circuit, there is only one path for current to flow.
Easy
True or false?
46.Which of the following is the correct circuit symbol for a battery?
Easy
- ATwo parallel lines, one longer and thinner, one shorter and thicker, with a plus and minus sign
- BA circle with a cross inside
- CA rectangle
- DA circle with an 'A' inside
47.Arrange the following steps in the correct order to draw a series circuit diagram with a cell, a switch, and a lamp.
Medium
- Draw the lamp symbol
- Draw the switch symbol
- Draw the cell symbol
- Connect all components with straight lines using a ruler
48.Which of the following are correct statements about circuit symbols? (Select all that apply)
Medium
- AA resistor is represented by a rectangle.
- BAn open switch allows current to flow.
- CA voltmeter is connected in parallel.
- DA lamp symbol is a circle with a cross.
49.Which of the following components is represented by a circle with a letter 'V' inside?
Easy
- AVoltmeter
- BAmmeter
- CCell
- DLamp
50.Match each circuit symbol to its correct component name.
Medium
- A circle with a cross inside
- Two parallel lines (one longer, one shorter)
- A circle with an 'A' inside
- A rectangle
- Lamp
- Cell
- Ammeter
- Resistor
51.Complete the sentence.
Easy
A ____ is used to measure the current in a circuit.
52.A student draws a circuit with a battery of three 1.5 V cells connected in series. What is the total potential difference supplied by the battery?
Easy
53.State the purpose of a resistor in a circuit.
Medium
54.Describe the difference between a series circuit and a parallel circuit.
Medium
55.A student draws a circuit with a battery of three 1.5 V cells connected in series. What is the total potential difference supplied by the battery?
Easy
- A4.5 V
- B3.5 V
- C6.5 V
- D5.5 V

திருப்புதல் குறிப்புகள்

## Circuit Symbols & Diagrams - **Connecting wire**: Use pencil and ruler to draw straight lines connecting components. - **Cell**: Provides potential difference (voltage). - **Battery**: Made of more than one cell. - **Lamp**: Produces light. - **Resistor**: Limits current and varies potential difference. - **Switch (open)**: Incomplete circuit; current cannot flow. - **Switch (closed)**: Complete circuit; current can flow. - **Ammeter**: Measures current; connected **in series** in the part of the circuit where current is measured. - **Voltmeter**: Measures potential difference; connected **in parallel** around the component. ## Series vs Parallel Circuits - **Series circuit**: Only one path for current to flow. - **Parallel circuit**: More than one path for current. ## Key Rules - Current flows only through a **complete** circuit. - Ammeters go **in series**; voltmeters go **in parallel**. - A battery is two or more cells combined.

Connecting wire: Used to connect different parts of a circuit together; drawn as straight lines.
Cell: Provides potential difference to the circuit.
Battery: Made of more than one cell.
Lamp: Produces light.
Resistor: Limits the amount of current in the circuit and is used to vary potential differences.
Open switch: When a switch is open, that part of the circuit is incomplete; current cannot flow.
Closed switch: When a switch is closed, that part of the circuit is complete; current can flow.
Ammeter: Measures the current in a circuit; goes in series in the part of the circuit where you want to measure the current.
Voltmeter: Measures the potential difference between two parts of a circuit; goes in parallel around the component you want to measure.
Series circuit: A circuit where there is only one path for the current to flow.
Parallel circuit: A circuit that has more than one path for the current.

ஃப்ளாஷ் கார்டுகள்

What is the purpose of using circuit diagrams?

Circuit diagrams are used to represent electrical circuits, typically drawn in pencil with a ruler for straight connecting wires.

What does a connecting wire represent in a circuit diagram?

A connecting wire is used to connect different parts of a circuit together.

What is the circuit symbol for a cell?

A cell is represented by a long line and a short parallel line (positive and negative terminals).

What does a cell provide to a circuit?

A cell provides potential difference to the circuit.

What is the difference between a cell and a battery?

A battery is made of more than one cell connected together.

What is the circuit symbol for a lamp?

A lamp is represented by a circle with a cross inside.

What does a lamp do in a circuit?

A lamp produces light.

What is the circuit symbol for a resistor?

A resistor is represented by a zigzag line.

What is the function of a resistor?

A resistor limits the amount of current in the circuit and is used to vary potential differences.

What is the circuit symbol for an open switch?

An open switch is represented by a break in the line with a small circle at each end, often drawn as a lever that is not touching.

What happens when a switch is open?

When a switch is open, that part of the circuit is incomplete and current cannot flow through it.

What is the circuit symbol for a closed switch?

A closed switch is represented by a line connecting two circles, often drawn as a lever that is touching.

What happens when a switch is closed?

When a switch is closed, that part of the circuit is complete and current can flow through it.

What is the circuit symbol for an ammeter?

An ammeter is represented by a circle with the letter 'A' inside.

What does an ammeter measure and how is it connected?

An ammeter measures the current in a circuit and is placed in series in the part of the circuit where you want to measure the current.

What is the circuit symbol for a voltmeter?

A voltmeter is represented by a circle with the letter 'V' inside.

What does a voltmeter measure and how is it connected?

A voltmeter measures the potential difference between two parts of a circuit and is placed in parallel around the component you want to measure.

What is a series circuit?

A series circuit is one where there is only one path for the current to flow.

What is a parallel circuit?

A parallel circuit has more than one path for the current to flow.

State the purpose of an ammeter.

An ammeter measures the current in a circuit.

Describe the difference between a series and a parallel circuit.

A series circuit has only one path for current, while a parallel circuit has more than one path.

State the difference between a cell and a battery.

A battery is made of more than one cell.

True or false: Current can flow through an incomplete circuit.

False. Current cannot flow through an incomplete circuit.

True or false: Voltmeters go in series with the component you want to measure the potential difference across.

False. Voltmeters go in parallel around the component.

Unlock all 55 questions, flashcards & more

இந்த தலைப்பிற்கான ஒவ்வொரு கேள்வியையும், ஸ்லைடுகளையும், ஃப்ளாஷ் கார்டுகளையும் மற்றும் திருப்புதல் குறிப்புகளையும் பார்க்க இலவச கணக்கை உருவாக்கவும்.

பதிவு செய்க — இலவசம்உள்நுழைக

முந்தைய தேர்வுகள்

இந்த தலைப்பிற்கான முந்தைய தேர்வு பயிற்சி விரைவில் வருகிறது.

விரைவில் வருகிறது