Electromagnetism
Học bằng cách chơi
Trả lời những câu hỏi này để kiếm năng lượng, rồi câu cá và khám phá. Không cần tài khoản.
Ghi chú bài học
Electromagnetism Basics
- A current flowing through a wire creates a magnetic field around it – this is an electromagnet.
- The magnetic field is strongest near the wire and gets weaker further away.
- If the current stops, the magnetic field disappears.
- The field lines are concentric circles around the wire, closer together near the wire.
Right Hand Rule
- The right hand rule gives the direction of the magnetic field: point your thumb along the current (I), and your fingers curl in the direction of the magnetic field (B).
- Alternatively, plotting compasses can show the field direction around a current-carrying wire.
Solenoids
- A solenoid is a coil of wire that produces a magnetic field like a bar magnet.
- The magnetic field is strongest inside the solenoid.
- Three ways to increase the field strength: increase number of turns, increase current, add an iron core.
Soft vs Hard Magnetic Materials
- A soft magnetic material (e.g., iron) is easily magnetised and demagnetised – ideal for electromagnets that switch on/off.
- A hard magnetic material is difficult to magnetise and demagnetise and would retain magnetism – not suitable for a solenoid core.
Simple circuit showing current flow (I) through a wire, creating a magnetic field around it.
Slide
Sign up free to view the lesson slides
Step through every slide for this topic — plus flashcards and revision notes — with a free account.
Câu hỏi luyện tập
Xem trước miễn phí — 8 trên 55 câu hỏi. Đăng ký để xem tất cả.
1.What must flow through a wire to create an electromagnet?
Easy- AElectric current
- BVoltage
- CResistance
- DMagnetic field
2.What is a solenoid?
Easy- AA coil of wire
- BA straight wire
- CA bar magnet
- DAn iron core
3.Where is the magnetic field produced by a solenoid strongest?
Easy- AInside the solenoid
- BOutside the solenoid
- CAt the ends of the solenoid
- DFar away from the solenoid
4.Which of the following is NOT a way to increase the strength of the magnetic field produced by a solenoid?
Easy- AIncrease the voltage
- BIncrease the number of turns in the coil
- CIncrease the current
- DAdd an iron core
5.What is the difference between a soft magnetic material and a hard magnetic material?
Medium- ASoft magnetic materials can be easily magnetised and demagnetised, while hard magnetic materials are difficult to magnetise and demagnetise
- BSoft magnetic materials are difficult to magnetise and demagnetise, while hard magnetic materials are easy
- CSoft magnetic materials are always iron, while hard magnetic materials are always steel
- DSoft magnetic materials retain magnetism, while hard magnetic materials do not
6.Which of the following is an example of a soft magnetic material?
Easy- AIron
- BSteel
- CCobalt
- DNickel
7.Why should hard magnetic materials not be placed in a solenoid core?
Medium- AThey would retain some magnetism when the current is switched off
- BThey are too heavy
- CThey do not conduct electricity
- DThey would increase the resistance
8.What happens to the strength of the magnetic field as you go further from a current-carrying wire?
Easy- AIt gets weaker
- BIt gets stronger
- CIt stays the same
- DIt becomes zero immediately
Unlock all 55 questions, flashcards & more
Tạo tài khoản miễn phí để xem mọi câu hỏi, slide, thẻ ghi nhớ và ghi chú ôn tập cho chủ đề này.