Timbers and manufactured boards

邊玩邊學

回答這些題目賺取能量，接著就能釣魚、探索。不需要帳號。

給教育者：為 Timbers and manufactured boards（Design and Technology、Materials）準備好可直接使用的課程投影片, 複習筆記——用於你的課程，或把這個主題當成互動班級活動，讓學習者以即時遊戲的方式進行。

課程筆記

Hardwoods are timbers from flowering trees, commonly broad-leaved species such as oak, beech, ash and teak. Some are evergreen. Softwood timbers commonly come from conifers such as pine, spruce, cedar and larch; larch is deciduous. Leaf-shedding is not the defining hardwood/softwood distinction.
The names do not guarantee physical hardness, density, durability, growth rate or cost. Choose species and grade for the purpose: suitable softwoods can serve structural applications, and some hardwood species are relatively soft. Supply, provenance and processing affect price as well as growth and demand.

Conversion cuts a log into usable sections. Cutting patterns affect yield, grain appearance and movement, while seasoning concerns reducing moisture toward a level appropriate to intended service. These are different operations.
Air drying and kiln drying offer different control and time requirements. Kiln drying manages temperature, airflow and humidity; an unsuitable schedule can create defects. The aim is not necessarily to remove every trace of water.
Wood can gain or lose moisture as conditions change and can shrink, swell or distort. Seasoning reduces some later movement risks but does not permanently prevent them. Appropriate storage, exposure protection and design allowance remain important.

Plywood uses bonded veneers with commonly alternating adjacent grain directions. This can improve dimensional stability and distribute properties across directions, but strength and durability depend on lay-up, grade, thickness, adhesive and loading. It can still split, delaminate or deteriorate under unsuitable conditions.
MDF uses fine wood fibres and binder, while particleboard uses coarser particles and binder. A smooth MDF face can suit paint; suitable particleboard can provide an economical indoor panel. Standard interior boards are not automatically suitable for repeated wetting, and moisture-resistant does not mean waterproof.
Blockboard typically uses a core of wood strips with facing veneers; hardboard is another fibreboard form. Coatings or decorative veneers change the finished surface but do not make the entire core solid timber. Select fixing design, edge treatment, span and grade for the application.
MDF and other wood dust need appropriate control because inhalation can harm health. Follow supervised, assessed workshop procedures. Natural solid timber is not exempt from dust concerns; this lesson does not prescribe equipment settings or replace workshop instruction.

Choose joints by function, grain and load. A tenon fits a mortise in a frame; dovetails interlock to resist relevant separation forces in drawer corners; dowels locate and connect parts. A joint name alone does not guarantee strength without suitable proportions, fit and assembly.
Finishes such as paint, varnish, oil, stain and wax offer different appearance and protection. They do not universally waterproof timber or stop moisture movement. Specify suitable preparation, exposure and maintenance rather than assuming a decorative finish substitutes for durability or drainage.

FSC 100% identifies forest-based material from FSC-certified forests; FSC Recycled concerns recycled material; FSC Mix combines permitted categories including certified, recycled and/or controlled sources. Read the actual sourcing claim rather than treating all labels as identical.
Responsible sourcing is one aspect of sustainability, alongside forest effects, material efficiency, useful life, repair, adhesives, transport and recovery. Replanting alone or a certification label does not establish the lowest whole-life impact or structural suitability of the finished product.

Step through every slide for this topic — plus flashcards and revision notes — with a free account.

免費預覽——33 題中的 8 題。註冊即可查看全部。

這個主題的歷屆試題練習即將推出。

即將推出