Simple Molecules & Covalent Bonds

邊玩邊學

回答這些題目賺取能量，接著就能釣魚、探索。不需要帳號。

給老師：為 Simple Molecules & Covalent Bonds（Chemistry、CIE）準備好可直接使用的課程投影片, 複習筆記, 圖表——用於你的課程，或把這個主題當成互動班級活動，讓學生以即時遊戲的方式進行。

課程筆記

Covalent Bonds

A covalent bond is formed when pairs of electrons are shared between atoms.
Only non-metal elements participate in covalent bonding.
Each atom gains a full outer shell of electrons (noble gas configuration).
Covalently bonded substances may consist of small molecules or giant molecules.
Dot-and-cross diagrams show the electronic configuration: dots for one atom's electrons, crosses for the other's.
Electron shells overlap and shared electrons are shown in the overlap region.

H₂ dot-and-cross diagram: single covalent bond formed by one shared pair of electrons.

Single Covalent Bonds

A single covalent bond involves one shared pair of electrons.
Examples: H₂ (H–H), Cl₂ (Cl–Cl), H₂O, CH₄, NH₃, HCl.
In H₂O, oxygen shares one electron with each hydrogen atom, forming two single bonds.
In CH₄, carbon shares one electron with each of four hydrogen atoms.
In NH₃, nitrogen shares one electron with each of three hydrogen atoms.
In HCl, hydrogen and chlorine share one pair of electrons.

H₂O dot-and-cross diagram: oxygen forms a single covalent bond with each hydrogen atom.

Double and Triple Covalent Bonds (Extended)

Some atoms share two pairs of electrons to form a double bond.
Some atoms share three pairs of electrons to form a triple bond.
O₂ has a double bond (O=O) – each oxygen shares two electrons.
N₂ has a triple bond (N≡N) – each nitrogen shares three electrons.
Ethene (C₂H₄) has a double bond between the two carbon atoms.
Carbon dioxide (CO₂) has two double bonds (O=C=O).

O₂ dot-and-cross diagram: a double covalent bond formed by two shared pairs of electrons.

Properties of Simple Molecular Compounds

Simple molecular compounds have low melting and boiling points.
They are usually liquids or gases at room temperature.
As molecule size increases, melting and boiling points increase.
They have poor electrical conductivity – do not conduct in solid or liquid state.
They are insulators (e.g., plastic coating on wires).

Explaining Properties (Extended)

Atoms within molecules are held by strong covalent bonds.
Between molecules there are weak intermolecular forces.
Low melting/boiling points are due to weak intermolecular forces requiring little energy to overcome.
Intermolecular forces are about one tenth as strong as covalent bonds.
Larger molecules have more electrons, increasing intermolecular forces and raising melting/boiling points.
Poor conductivity because there are no free ions or electrons to carry charge.

Simple molecular structure of water: strong covalent bonds within each molecule, weak intermolecular forces (dashed) between molecules.

Distinguishing Covalent from Ionic

Covalent compounds contain only non-metals.
Ionic compounds contain metal and non-metal.
In dot-and-cross diagrams, covalent compounds show overlapping shells with shared electrons.
Ionic compounds show separate ions with square brackets and charges.
Covalent compounds have low melting points; ionic compounds have high melting points.

Dot-and-cross diagram for sodium chloride: an electron is transferred from sodium to chlorine, forming separate ions shown with square brackets and charges.

投影片

Step through every slide for this topic — plus flashcards and revision notes — with a free account.

免費註冊登入

練習題

免費預覽——45 題中的 8 題。註冊即可查看全部。

1.What type of bonding is found in methane?
Easy
- ACovalent
- BIonic
- CMetallic
- DHydrogen bonding
2.Which of the following substances has a simple molecular structure?
Easy
- ACarbon dioxide
- BCalcium carbonate
- CCopper
- DMagnesium oxide
3.A covalent bond is formed when two atoms:
Easy
- AShare a pair of electrons
- BTransfer electrons
- CShare protons
- DAttract via opposite charges
4.When a simple molecular substance melts, what is broken?
Easy
- AIntermolecular forces
- BCovalent bonds
- CIonic bonds
- DMetallic bonds
5.Which of the following statements explains why ammonia does not conduct electricity?
Easy
- AIt does not contain any free ions or free electrons
- BIts ions are in a fixed position
- CIt has delocalised electrons
- DIt contains free electrons
6.The boiling point of nitrogen is very low even though the bond between atoms in a nitrogen molecule is very strong. Why?
Medium
- AOnly weak intermolecular forces need to be overcome
- BThe covalent bonds are broken during boiling
- CNitrogen molecules are very small
- DNitrogen is a gas at room temperature
7.Which of the following elements can form covalent bonds?
Easy
- ACarbon
- BSodium
- CCalcium
- DIron
8.Which of the following molecules contains a double bond?
Easy
- AOxygen (O2)
- BHydrogen (H2)
- CChlorine (Cl2)
- DMethane (CH4)

更多題目

9.A substance has a melting point of -94°C, does not conduct electricity as a solid or liquid. What type of structure does it most likely have?
Medium
- ASimple molecular
- BIonic
- CGiant covalent
- DMetallic
10.Which of the following is a property of simple molecular compounds?
Easy
- ALow melting and boiling points
- BHigh electrical conductivity
- CHard and brittle
- DHigh melting points
11.Substance X has a melting point of -94°C, a boiling point of 63°C, and does not conduct electricity as a solid or liquid. Which type of structure does substance X have?
Medium
- ASimple molecular
- BGiant ionic
- CGiant covalent
- DMetallic
12.The table shows the melting points and electrical conductivities of five substances. Which substance is likely to be a simple molecular compound? | Substance | Melting point (°C) | Conductivity as solid | Conductivity as liquid | |---|---|---|---| | A | -210 | does not conduct | does not conduct | | B | 777 | does not conduct | good conductor | | C | 962 | good conductor | good conductor | | D | 1410 | does not conduct | does not conduct | | E | 1064 | good conductor | good conductor |
Medium
- AA
- BB
- CC
- DD
13.The boiling point of nitrogen (N₂) is -196°C, yet the bond between nitrogen atoms is a very strong triple bond. Why is the boiling point so low?
Medium
- AOnly weak intermolecular forces need to be overcome for boiling, not the covalent bonds
- BThe triple bond breaks easily when heated
- CNitrogen molecules are very small so they boil easily
- DThe covalent bond is weak in nitrogen
14.A molecule of sulfur chloride (SCl₂) contains covalent bonds. Which diagram correctly represents the arrangement of outer electrons? (Use x for sulfur electrons, o for chlorine electrons.)
Hard
- ACl (with 7 o) sharing one pair with S (with 6 x) and another Cl sharing one pair, each Cl has 3 lone pairs, S has 2 lone pairs
- BCl (with 7 o) sharing two pairs with S (with 6 x) and another Cl sharing two pairs, each Cl has 2 lone pairs
- CCl (with 7 o) sharing one pair with S (with 6 x) and another Cl sharing one pair, each Cl has 3 lone pairs, S has 1 lone pair
- DCl (with 7 o) sharing one pair with S (with 6 x) and another Cl sharing one pair, each Cl has 3 lone pairs, S has no lone pairs
15.Which two substances from the list could exist as simple covalent molecules? List: A (melting point -210°C, boiling point -196°C), B (melting point 777°C, boiling point 1627°C), C (melting point 962°C, boiling point 2212°C), D (melting point -94°C, boiling point 63°C), E (melting point 1410°C, boiling point 2355°C), F (melting point 1064°C, boiling point 2807°C)
Medium
- AA and D
- BB and C
- CC and F
- DD and E
16.Why does neon exist as single atoms while fluorine exists as F₂ molecules?
Medium
- ANeon has a full outer shell of electrons and does not need to form bonds; fluorine has seven outer electrons and shares one pair to achieve a full shell
- BNeon is a noble gas and cannot form bonds; fluorine is a halogen and always forms diatomic molecules
- CNeon atoms are too small to bond; fluorine atoms are larger and can share electrons
- DNeon has a higher melting point than fluorine, so it prefers to be monatomic
17.The table shows the properties of four substances. Which substance is most likely to be a simple molecular substance? | Substance | Melting point (°C) | Boiling point (°C) | Conductivity (solid) | Conductivity (liquid) | |---|---|---|---|---| | P | 801 | 1413 | does not conduct | conducts | | Q | -95 | 36 | does not conduct | does not conduct | | R | 3550 | 4827 | does not conduct | does not conduct | | S | 650 | 1107 | conducts | conducts |
Medium
- AP
- BQ
- CR
- DS
18.A student measures the melting point of a substance and finds it to be -94°C. The substance does not conduct electricity as a solid or liquid. Which type of structure does it most likely have?
Medium
- AGiant ionic
- BSimple molecular
- CGiant metallic
- DGiant covalent
19.Substance X has a melting point of 777°C, a boiling point of 1627°C, and conducts electricity when molten but not as a solid. What type of structure does substance X have?
Medium
- ASimple molecular
- BGiant ionic
- CGiant metallic
- DGiant covalent
20.Which statement explains why ammonia (NH₃) does not conduct electricity?
Easy
- AIt contains free electrons and free ions.
- BIt does not contain free electrons and does not contain free ions.
- CIt contains free electrons but no free ions.
- DIt contains free ions but no free electrons.
21.The boiling point of nitrogen (N₂) is -196°C. Why is the boiling point so low even though the N≡N triple bond is very strong?
Medium
- AThe triple bond is weak.
- BOnly weak intermolecular forces need to be overcome during boiling.
- CThe covalent bonds break during boiling.
- DNitrogen atoms are very small.
22.Which two substances from the list below could exist as simple covalent molecules? List: A: melting point -210°C, boiling point -196°C, does not conduct B: melting point 777°C, boiling point 1627°C, conducts when molten C: melting point 962°C, boiling point 2212°C, conducts as solid D: melting point -94°C, boiling point 63°C, does not conduct E: melting point 1410°C, boiling point 2355°C, does not conduct F: melting point 1064°C, boiling point 2807°C, conducts as solid
Medium
- AA and B
- BA and D
- CC and E
- DD and F
23.A student draws a dot-and-cross diagram for a molecule of carbon dioxide. Which diagram is correct? (Use dots for carbon electrons and crosses for oxygen electrons.)
Medium
- AO (with 6 crosses) double bonded to C (with 4 dots) double bonded to O (with 6 crosses); each O has 2 lone pairs, C has no lone pairs.
- BO (with 6 crosses) single bonded to C (with 4 dots) single bonded to O (with 6 crosses); each O has 3 lone pairs, C has 2 lone pairs.
- CO (with 6 crosses) triple bonded to C (with 4 dots) single bonded to O (with 6 crosses); one O has 1 lone pair, the other has 3 lone pairs, C has 1 lone pair.
- DO (with 6 crosses) double bonded to C (with 4 dots) double bonded to O (with 6 crosses); each O has 4 lone pairs, C has 2 lone pairs.
24.Which two substances from the list could exist as simple covalent molecules? List: A: melting point -210°C, boiling point -196°C, does not conduct electricity B: melting point 777°C, boiling point 1627°C, conducts electricity when molten C: melting point 962°C, boiling point 2212°C, conducts electricity as solid and liquid D: melting point -94°C, boiling point 63°C, does not conduct electricity
Medium
- AA and D
- BB and C
- CA and B
- DC and D
25.Which of the following is the correct dot-and-cross diagram for a molecule of chlorine (Cl2)? (Use dots for electrons from one atom and crosses for the other.)
Medium
- ATwo Cl atoms with overlapping shells, each showing 7 outer electrons, with one shared pair in the overlap
- BTwo Cl atoms with separate shells, each showing 8 outer electrons, no overlap
- CCl+ and Cl- ions with square brackets and charges
- DTwo Cl atoms sharing two pairs of electrons
26.The table shows the melting points and electrical conductivities of five substances. Which substance is likely to be a simple molecular compound? | Substance | Melting point (°C) | Electrical conductivity (solid) | Electrical conductivity (liquid) | |---|---|---|---| | P | -95 | does not conduct | does not conduct | | Q | 801 | does not conduct | conducts | | R | 3550 | does not conduct | does not conduct | | S | 650 | conducts | conducts | | T | -7 | does not conduct | does not conduct |
Medium
- AP
- BQ
- CR
- DS
27.A student is given four substances with the following properties. Which substance is most likely to be a simple molecular substance? | Substance | Melting point (°C) | Boiling point (°C) | Electrical conductivity (solid) | Electrical conductivity (liquid) | |---|---|---|---|---| | A | -94 | 63 | does not conduct | does not conduct | | B | 777 | 1627 | does not conduct | good conductor | | C | 962 | 2212 | good conductor | good conductor | | D | 1410 | 2355 | does not conduct | does not conduct |
Medium
- AA
- BB
- CC
- DD
28.The diagram shows the arrangement of particles in a substance. Which type of structure does it represent?
Easy
- ASimple molecular
- BIonic
- CMetallic
- DGiant covalent
29.A student measures the boiling point of a liquid and finds it to be -162°C. The liquid does not conduct electricity. Which substance could it be?
Medium
- AMethane
- BWater
- CSodium chloride
- DCopper
30.Covalent bonds are formed by the sharing of electrons between atoms.
Easy
True or false?
31.Only metal elements can form covalent bonds.
Easy
True or false?
32.In a dot-and-cross diagram, electrons from one atom are represented by dots and from the other atom by crosses. What does the overlapping region represent?
Easy
- AThe shared pair of electrons in the covalent bond
- BThe nucleus of the atoms
- CThe inner shell electrons
- DThe ionic bond
33.Which of the following are properties of simple molecular compounds? (Select all that apply)
Medium
- ALow melting and boiling points
- BHigh electrical conductivity
- CPoor electrical conductivity
- DUsually liquids or gases at room temperature
- EStrong intermolecular forces
34.Match each molecule to the number of covalent bonds between its atoms (single, double, or triple bond).
Easy
- Hydrogen (H₂)
- Oxygen (O₂)
- Nitrogen (N₂)
- Single bond
- Double bond
- Triple bond
35.Arrange the following molecules in order of increasing strength of intermolecular forces (weakest first).
Medium
- Methane (CH₄)
- Ethane (C₂H₆)
- Propane (C₃H₈)
36.Simple molecular compounds conduct electricity in the solid state.
Easy
True or false?
37.Which of the following correctly describes the relationship between covalent bonds and intermolecular forces in a simple molecular substance?
Medium
- ACovalent bonds are stronger than intermolecular forces.
- BIntermolecular forces are stronger than covalent bonds.
- CCovalent bonds and intermolecular forces are equal in strength.
- DIntermolecular forces do not exist in simple molecular substances.
38.Match each molecule to the type of covalent bond it contains (single, double, or triple bond).
Easy
- Nitrogen (N₂)
- Oxygen (O₂)
- Chlorine (Cl₂)
- Single bond
- Double bond
- Triple bond
39.Arrange the following substances in order of increasing melting point (lowest first).
Medium
- Water (H₂O)
- Methane (CH₄)
- Ethanol (C₂H₅OH)
40.Complete the sentence.
Easy
A covalent bond is formed when two atoms ____ a pair of electrons.
41.How many electrons are shared in a double covalent bond?
Easy
42.What is the name given to the forces that act between molecules in a simple molecular substance?
Easy
43.Complete the sentence: In a dot-and-cross diagram for a covalent compound, the electron shells of each atom ___ and the shared electrons are shown in the area of overlap.
Medium
In a dot-and-cross diagram, the electron shells of each atom ____.
44.Complete the sentence about covalent bonding.
Easy
Covalent bonds are formed when pairs of electrons are ____ between atoms.
45.How many electrons are shared in a double covalent bond?
Easy
- A3
- B4
- C5
- D6

Unlock all 45 questions & more

建立免費帳號，即可查看這個主題的所有題目、投影片、字卡與複習筆記。

免費註冊登入

歷屆試題

這個主題的歷屆試題練習即將推出。

即將推出